TECHNICAL SPECIFICATIONS AND FUNCTIONS
The training board is equipped with a functional BOSCH 5.3 ABS/ASR braking system;
Installed pressure gauges can monitor the pressure in the main brake circuit and the individual pressure of each wheel;
The training board is equipped with the original hydraulic brake system. The brake pads of the brake drums are used instead of the brake discs to demonstrate when the pressure rises up and the braking moment starts;
The operation of the hydraulic circuit is shown on the stand in the pictures in different mode;
Electric wiring diagram with built-in banana plug jumpers for measurements and simulation of the system’s fault codes; Diagnostic and measurement
OSCILLOSCOPE/MULTIMETER
System’s parameters are measured by connecting to the banana connector;
Ability to measure electrical signal parameters of each system component;
CONTROL UNIT DIAGNOSIS
Diagnosis through OBD 16 – pin diagnostic connector
Electronic control unit (ECU) identification
Reading/erasing fault codes
Displaying the operating system parameters (live data)
Activating the actuators (depends on the control unit)
OTHER
The stand has a closed structure – internal wiring is not visible;
Power supply: 12 V from the battery (not included as standard accessory)
Dimensions approx. (HxLxW): 1820x1360x500 mm
Nett weight approx.: 70 Kg
Made in EU
CE certificate
OPTIONAL ACCESSORIES
12 V Battery
220/12 V power supply unit
Automotive oscilloscope
OBD Diagnostic scan tool
